Finished - at last

And it's better than it has any right to!

It started in The Guru's workshop, when I said I thought I'd turn the blank upside down and try a natural edge bowl. ( You HAVE noticed the edge isn't nice and flat and even, it's all wavey!)

The Guru said "Hmmmm. Whatever you reckon".

You need to know him to understand what that revealed of his opinion of the idea.

But I went ahead, and received the usual guidance and assistance. And all went fairly well.

At the sanding stage I took it home, intending to finish it on my newly acquired Jet mini-lathe. But I found I couldn't mount it, as the spigot on the bowl was to big for my only chuck.

Dammit!

I shelved tlhe bowl (literally) for a while, then had a brilliant idea. I drilled the base of the bowl and turned and fitted a pedestal. Wundebar. You are bnrighter than Einstein even...

Unfortunately, the pedestal wasn't quite exactly straight, or centred, or perhaps both. And when you put a slightly off balance lump on a lathe, the unbalance is magnified.

I shelved it again!!

Then, a few days ago, I plucked up my courage, gritted my teeth, put my shoulder to the wheel, my nose to the grindstone... and found it was impossible to work in that position.

So I attached the bowl to the lathe via the pedestal, and spent an uncomfortable hour or so sanding and polishing with the bowl thumping and bumping in unbalance.

And the result is OK. Not perfect - [perfection is for the gods).

But OK is OK.

Natural edge bowl on pedestal, New Guinea rosewood, finish Rustins Plastic.

all the best

vsquared47

pens, pens, pens

This is the completion of a small order for pens, which will now travel to the far side of the world, before meeting their users.

The timbers in the four pens on the left are, from the left: Cypress pine, Darwin Black Wattle, Flame Sheoak, and Northern Ti Tree.

The two pens in the photo on the right are the Flame Sheoak and the Ti Tree. All the timbers are Australian natives, the black wattle and ti tree are Northern Territory indigenous.

The sheoak and the ti tree are outstanding timbers for small turned items, being dense, close grained, with a fine finish. the sheoak has great colour and pattern, reddish brown with black streaks. Very showy, though it doesn't show up much in the photos. We'll blame the photographer, not the timber or woodturner.

I take more pride in my wood craft than photography these days. though I used to be a pretty fair clicker. In fact, the older I get the better I used to be.

The cypress and black wattle are fine general purpose timbers, for turning, flooring (the cypress), furniture work, even carving. The ti-tree and sheoak are not much good for anything except small craft items, but what they do well they do really well.

I hope the people who find themselves in possession of any of these pens will visit this site. Leave a comment, tell me how great the pens are, tell me that MissE behaved herself (ha ha) or advise me not to give up my day job - whatever - it'll be good to hear from you.